The Effect of Using Crushed Boulder Aggregate on HMA Performance.
Journal: Journal of Zankoy Sulaimani (Vol.15, No. 2)Publication Date: 2013-06-04
Authors : Faris M. Jassim;
Page : 021-029
Keywords : Crushed aggregate; HMA performance; Hot mix asphalt; Marshall design method.;
Abstract
Shear strength of the asphalt mixture (Marshall Stability) decreases as the percentage of rounded particles increases, which makes the mixture more susceptible to Permanent Deformation. According to SORB[1] specifications revised 2004 (R9), for prepare bitumen base layer for Hawler- Perda Highway project (new direction), the max. nominal size, (25.4 mm) of aggregate at three different crushed boulders levels: 0% (all was rounded), 50%, and 100% (more than one fracture face), added to Two different asphalt penetration grade types (40-50), and (60-70) were used to prepare the specimens. Specimens were prepared a total of 108 specimens for performance evaluation tests. It has been shown that Crushed boulders mixtures have marshall stiffness value more than 250% (100% crushing), increase VMA (voids in mineral aggregate) more than 130%, and to increase the resistance of moisture damage 135% in comparison with rounded mixtures respectively.
Other Latest Articles
- Tests of Fibrous and Nonfibrous Reinforced Concrete Continuous Deep Beams with Web Openings.
- Karst cavity detection in carbonate rocks by integration of high resolution geophysical methods.
- The 2D resistivity imaging method in mountainous area over different slope.
- Numerical Groundwater Flow Modeling for The Intwrgranular Aquifer in Sarsian Sub-Basin, Dokan Lake, Iraqi Kurdistan Region.
- Minimize of Error Estimation and Approximate Solution of Fifth Order Initial Value Problems.
Last modified: 2013-07-24 08:35:58