3-D Modeling and FEA of an Improved Design of Axle of Hot Metal Ladle Transfer Car Bogie
Journal: International Journal of Analytical, Experimental and Finite Element Analysis (Vol.2, No. 3)Publication Date: 2015-09-30
Authors : Makarand M. Shesh; Vivek Padole;
Page : 95-97
Keywords : Finite Element Analysis; Locomotive; 3D Modeling;
Abstract
The paper imparts an idea about the repetitive failure of Axle of Hot Metal Ladle Transfer Car used in steel industries for carrying hot molten metal from blast furnace to steel melt shop. In earlier paper from same author in similar related subject a 3-D model was prepared and a solid mesh of the model of Wheel and Axle assembly was analysed by FEA techniques and the result was compared with conventional calculations for stress per wheel of hot metal transfer car bogie. An improved redesign of Axle is prepared in 3-D modeling and the results are compared with 3-D Basic model. The redesign results found satisfactory with less stress value and shown reduced bulkiness of axle.
Other Latest Articles
- Modeling Cylindrical Dipole Antenna by Finite Element Method at 2400MHz
- Static and Dynamic Analysis of Suspension System with Longitudinal Spring and Damper Assembly
- Increase the Efficiency of Internal Combustion Engine Fin by Replacing the Conventional Fin with Parabolic Fin
- Energy Absorption Capacity of Thin Walled Circular Aluminium Sections
- Energy Absorption of Thin Walled Rectangular Aluminium Sections
Last modified: 2015-09-20 15:27:39