CHARACTERIZATION OF ABS COMPOSITES REINFORCED SHORT GLASS FIBER
Journal: IMPACT : International Journal of Research in Engineering & Technology ( IMPACT : IJRET ) (Vol.3, No. 10)Publication Date: 2015-10-22
Authors : ANKULORIYA; ROHIT RAJVAIDYA;
Page : 35-42
Keywords : ABS; Short Glass Fiber; Reinforcement; Composites; Polymer;
Abstract
Acrylonitrile Butadiene Styrene (ABS) has several mechanical applications such as gears, bearings, washers etc. In these applications, wear is the primary cause of failure. In this study ABS from e-waste was reinforced with short glass fibers (SGFs). The effects of SGF concentration, on the mechanical properties of the composites were examined. Increasing the SGF concentration at a weight ratio of 5 and, 30% resulted in improved tensile strength, tensile modulus, but drastically lowered the strain-at-break. Extrusion process was used for reinforcement and bonding between ABS and SGF which are supported by scanning electron micrographs of the ABS/ SGF composites, which exhibited an improved adhesion between the SGFs and ABS matrix
Other Latest Articles
- Development of Traffic Volume Measuring System Utilizing DSRC and Radar Detector
- Response Time Analysis Considering Sensing Data Synchronization in Mobile Cloud Applications
- Design Improvements of Investment Analysis System for SOC
- Development of a Command and Control System Based on Network Emulator
- An Adaptive Location Detection Scheme for Energy-Efficiency of Smartphones
Last modified: 2015-11-20 17:21:25