Experimental Investigation on the Concrete as a Partial Replacement of Fine aggregate with Stone dust and Brick dust
Journal: International Journal for Scientific Research and Development | IJSRD (Vol.3, No. 10)Publication Date: 2016-01-01
Authors : Patnala. Kalyani; E.V. Raghava Rao;
Page : 107-110
Keywords : Stone Dust; Brick Dust; Workability; Compressive Strength; Split Tensile Strength; Flexural Strength;
Abstract
This project work involves in an experimental study on the concrete by using stone dust and brick dust on the mechanical properties of the concrete. In this experimental study two types admixtures are used in preparation of concrete mix. Stone dust and brick dust are added from 0% to 25% by weight of fine aggregate with increment of 5%. A comparative analysis has been carried out for conventional concrete to that of the admixture concrete in relation to their compressive, split tensile and flexural strength properties. As the stone dust and brick dust content increases in cement concrete, the compressive and split tensile values are proportionally increasing. It is observed that at 20% of stone dust and brick dust is the optimum dosages for concrete mixture.
Other Latest Articles
- Avoid Collision And Broadcasting Delay In Multi-Hop CR Ad Hoc Network Using Selective Broadcasting
- Waterproofing Challenges and Suggested Remedial measures for High Rise Buildings: A Case Study
- MEMS Technology & its application for Miniaturized Space System
- PROTOCOL ANALYSIS TO PREVENT STORM ATTACKS IN 3G MOBILE NETWORKS
- Portable ECG Monitoring System using Lilypad And Mobile Platform-PandaBoard
Last modified: 2016-01-06 20:48:04