Evaluation the Effect of Machining Parameters on MRR of Mild Steel
Journal: International Journal for Scientific Research and Development | IJSRD (Vol.3, No. 10)Publication Date: 2016-01-01
Authors : Sandeep Boora; Sandeep Kumar;
Page : 1037-1040
Keywords : Taguchi Design; Orthogonal Array; Turning; Cutting Speed; Feed;
Abstract
Turning metal removal is the removal of metal outside diameter of a rotating cylindrical workpiece. As it is used to reduce the diameter. of the work piece generally to a specified dimension and to produce a smooth finish on the metal. Often, the work piece is turned so that the sections have different diameters. As is the machining operation that produces cylindrical. In its basic form, it can be defined as an outer surface machining: Based on the findings of the Pilot study, actual experimentation work will be designed and input machining parameters and their values finalized. The results are expected to show that the response variables (output parameters) strongly influenced by the control factors (input parameters). So, the results which are obtained after experimentation analyzed and modeled for their application in manufacturing industry It is concluded that for MRR be maximum factor Cutting speed has to be at high level 3, Feed has to be at high level & D.O.C has to be at high level.
Other Latest Articles
- Filter unwanted messages from walls and blocking nonlegitimate user in osn
- Keystroke Dynamics Authentication with Project Management System
- A Survey on Sentiment Analysis and Opinion Mining
- A Defect Prediction Model for Software Product based on ANFIS
- Experimental Investigation of Granulated Blast Furnace Slag ond Quarry Dust as a Fine Aggregate in Cement Mortar
Last modified: 2016-01-11 18:56:31