Pengaruh sulfur terhadap sifat fisika campuran pale crepe dan SBR untuk karet tahan panas
Journal: Majalah kulit, karet, dan plastik (Vol.29, No. 2)Publication Date: 2013-12-30
Authors : Arum Yuniari; Nursamsi Sarengat; Sri Brataningsih Puji Lestari;
Page : 63-68
Keywords : Pale crepe/SBR blends; sulfur; physical properties; heat resistant rubber;
Abstract
Sulfur plays an important role in the rubber vulcanization process especially in the formation of crosslinks. Heat resistant rubber made from mixing pale crepe and SBR requires the right amount of sulfur as crosslinking agent. The purpose of the study was to determine the effect of the addition of sulfur on the changes in physical properties before and after aging. Heat resistant rubber was made with variation of pale crepe/SBR: 80/20; 70/30; 60/40; 50/50 phr and sulfur variation of 1; 1.5 phr. The results showed that sulfur was influential in the crosslinks formation. The addition of 1 phr sulfur gave higher physical properties of the vulcanized with 1.5 phr sulfur. The changes of physical properties after aging process of the vulcanized with sulfur 1 phr was lower than the vulcanized with sulfur 1.5 phr. Vulcanized pale crepe/SBR (70/30) with 1 phr sulfur could be applied as heat-resistant rubber products.
Other Latest Articles
- Prototipe sistem peringatan dini berbasis SMS untuk mendeteksi kenaikan kadar gas amoniak di pengolahan air limbah industri penyamakan kulit
- Efek ukuran, bentuk dan konsentrasi partikel precipitated calcium carbonate (PCC) yang ditambahkan pada sifat mekanik komposit karet alam
- Pengurangan COD dan BOD limbah cair terolah industri penyamakan kulit menggunakan taman tanaman air dengan tanaman melati air
- Penurunan COD air limbah industri penyamakan kulit menggunakan reagen fenton
- Sifat fisika dan analisis gugus fungsi karet seal o-ring dari bahan termoplastik elastomer nitrile butadiene rubber (NBR) dan polyvinyl chloride (PVC)
Last modified: 2016-02-09 12:13:51