Disposal of liquid industrial waste of impurity metals, surfactants and related products
Journal: Engineering industry and life safety (Vol.9, No. 3)Publication Date: 2012-09-30
Authors : Kolesnikov A.V.;
Page : 15-22
Keywords : ecology; wastewater; water quality; surfactants; heavy and non-ferrous metals; petroleum products;
Abstract
The influence of surfactants of different nature on physico-chemical parameters and efficacy of electroflo-tation disperse phase extraction of metals. The scheme allows to purify waste water complex of heavy metal ions (Zn2+, Ni2+, Cu2+, Cr3+,6+, Fe2+,3+) and petroleum products (oil, diesel). Its advantages are that most of the effluent (treated) can be reset in a citywide sewage system, while a small part (10%) ? 5 returned to the device and purify by other methods (membrane), either by itself or with the new runoff. Thus, there is the possibility of a closed loop process of purification, which gives tangible economic benefits, as well as considerably (up to 5 times) increases the service life of the membrane and nanofilters. Polluting components are removed in the form of froth product (flotoslame) and can be recycled solid waste reception points. A schematic process flow cleaning water drains of complex composition.
Other Latest Articles
- Increase the efficiency of the geodynamic control through the introduction of new geoelectric models
- Traumatism and breakdown susceptibility at operation of load-lifting cranes
- Self-oscillatory movement of the indenter in the direction of the velocity at the surface plastic deformation
- Calculation of extreme stress at any point in detail misalignment screw mechanism in operation
- The development of magnetorheological vibration damper for industrial machines
Last modified: 2013-08-29 02:19:59