Perancangan dan Analisis Perbandingan Implementasi OSPF pada Jaringan IPv4 dan IPv6
Journal: Jurnal Elkomika (Vol.2, No. 1)Publication Date: 2014-01-01
Authors : PAULINE RAHMIATI; DWI ARYANTA; TAUFIQ AGUNG PRIYADI;
Page : 40-52
Keywords : OSPF; IPv4; IPv6; delay; convergence;
Abstract
OSPF (Open Shortest Path First) is a routing protocol that opened and supported by a wide range of network devices. IPv4 has reached the maximum limit on the number of addresses that IPv6 are a solution in this case. Same as IPv4, IPv6 also has begun to be implemented for the OSPF routing protocol, therefore this study wiould design an IPv6 OSPF routing protocol and as a comparison will be compared to IPv4 OSPF. Cisco Packet Tracer 5.3 software was used to simulate the made network design. This research would compare two pieces of network-based routing protocol OSPF, OSPF for IPv4 and IPv6. The first scenario was done 100 times in of 5 cases to determine the value of delay OSPF OSPF IPv4 and IPv6. The second scenario was carried out link terminations 30 times, it was seen from the tests was the result of trace route from the existing cost. The third scenario was done by observed at the convergence time of OSPF IPv4 and IPv6. The overall delay value OSPF IPv6 better than IPv4 OSPF by 3-6%, the trace route and the OSPF cost value of IPv6 and IPv4 OSPF were same but delay OSPF IPv6 was better 3-6% and convergence time was the same as IPv4 OSPF OSPF IPv6 as 10 seconds.
Other Latest Articles
- Memory, History, and the Construction of Self in Dina Arma’s Novel The Road Home (Doroga domoy) (2009)
- Pemanfaatan Sistem RFID sebagai Pembatas Akses Ruangan
- The Caucasian Deputies' Visit to Istanbul and the Caucasusian Front (1918)
- Demographic Structure and Economic Life of the Circassian Settlers in the Ivraca and Rahova Regions of Bulgaria in the 1860s and 70s
- Perancangan dan Realisasi Kontrol Prototype Landing Gear System Menggunakan PLCmikro berbasis Mikrokontroller PIC16F877A
Last modified: 2016-03-25 10:46:06