USING OF FIBER COMPOSITE OF POLYPROPYLENE TO MANUFACTURING CARS BUMPERS
Journal: Academic Research International (Vol.3, No. 2)Publication Date: 2012-09-15
Authors : Sami M. Dakina;
Page : 111-113
Keywords : Cars bumpers; polypropylene resin; Mechanical Properties;
Abstract
This research aims to manufacturing cars bumpers from polypropylene resin reinforced by it glass fibers with different reinforcement percentage (10%,30%,50%,70%) and study the impact strength and compressive strength for obtained composite material .An Improvement was happened in these properties after reinforcement by fibers The value of mechanical properties will increase with increasing percentage of reinforcement . Impact strength increased from (85Kj/m2 ) to (498Kj/m2 ) and compressive strength from (51Mpa) to (310Mpa) for reinforcing percentages 0% and 70% respectively.
Other Latest Articles
- MICRO-CONTROLLER BASED CUMULATIVE GRADE POINT AVERAGE (MICGPA) CALCULATOR
- DEPLOYMENT OF INTERNET PROTOCOL TELEVISION (IPTV): HOW READY IS NIGERIA?
- COMPARISON OF THE PERFORMANCES OF DIFFERENTIAL EVOLUTION, PARTICLE SWARM OPTIMIZATION AND HARMONY SEARCH ALGORITHMS ON BENCHMARK FUNCTIONS
- A LANGUAGE FOR STREAMS ON RECONFIGURABLE MANY-CORES
- USING OF ARAMID FIBRES REINFORCED POLYSTYRENE FOR MANUFACTURING AUTOMOTIVES PARTS
Last modified: 2013-09-07 04:54:19