AFFECT OF 10% WT GALENA POWDER ON THE ABSORBITIVITY OF BLACK PAINT
Journal: International Journal of Advanced Research in Engineering and Technology (IJARET) (Vol.7, No. 2)Publication Date: 2016-04-23
Authors : IESSA SABBE MOOSA;
Page : 1-8
Keywords : Galena ingot; Al- Buraimi City - Sultanate of Oman; high absorbitivity; temperature difference; Iaeme Publication; IAEME; Technology; Engineering; IJARET;
Abstract
Addition of Galena Powder to black paint with a range of particle size has been studied, as a developed selective solar absorber for domestic use for water heating system. The powder used was prepared from an ingot of Galena. Selective surfaces; pure aluminum, black paint, and mixture of black paint with galena powder having particle size range of about 250μm and less greater than 125μm at 10% wt were experimented. Temperature difference (?T) as a function of exposure time has been studied pertaining to the mixture of black paint with Galena powder. Furthermore, microstructure of the used bulk ingot of Galena was investigated by using SEM. An increase of about 5 0C of water temperature was gained by using the Galena powder compared with black paint. The results of this attempt of research showed that the maximum value of water temperature was around 95 0C in Al- Buraimi City, Sultanate of Oman.
Other Latest Articles
- OPTIMIZATIONS OF MACHINING PARAMETER IN WIRE EDM FOR 316L STAINLESS STEEL BY USING TAGUCHI METHOD, ANOVA, AND GREY ANALYSIS
- SELF POWERED PESTO?SPRAYER
- PARAMETER OPTIMIZATION IN VERTICAL MACHINING CENTER CNC FOR EN45 (STEEL ALLOY) USING RESPONSE SURFACE METHODOLOGY
- TOTAL EFFECTIVE ENERGY MANAGEMENT: THE MUST NEED FOR INDIAN INDUSTRY
- EXPERIMENT ON MULTI BLEND BIODIESEL USING JATROPHA AND PONGAMIA BIODIESEL ON SINGLE CYLINDER DIESEL ENGINE WITH BASE LINE OF DIESEL FUEL
Last modified: 2016-05-24 20:34:24