A COMPARATIVE STUDY OF BS8110 AND EUROCODE 2 STANDARDS FOR DESIGN OF A CONTINUOUS REINFORCED CONCRETE BEAM
Journal: International Journal of Civil Engineering and Technology (IJCIET) (Vol.6, No. 5)Publication Date: 2015-06-17
Authors : T.C. NWOFOR; S. SULE; D.B. EME;
Page : 76-84
Keywords : BS8110-97; Eurocode 2; Tension Reinforcements; Shear Reinforcements; Economic Design; Iaeme Publication; IAEME; Civil; Engineering; IJCIET;
Abstract
In this paper, a comparative study of BS 8110-97 an d Eurocode2 for the design of reinforced concrete beam with a particular interest on the are a of tension and shear reinforcements required, with the aim of determining which of the two codes provides the most economic design is carried out using Microsoft excel spreadsheet. A six-span continuous beam from the roof of a three storey shopping complex was selected and designed with the aid of a programmed excel spread sheet, taking into account only dead and live loads and as suming all spans to be loaded equally for both dead and live load combination. The self-weight of the beam was taken as the dead load while the live load was assumed to be a unity. The result of the analysis was used to design the beams based on both codes with the aid of a programmed spread sheet. The percentage difference between the areas of steel required by the two codes was calculated with the BS 8110 code results as the control values
Other Latest Articles
- DIMENSIONAL ANALYSIS DESIGN MODEL OF BIOCHEMICAL OXYGEN DEMAND IN INTEGRATED SOLAR AND HYDRAULIC JUMP ENHANCED WASTE STABILIZATION POND
- EFFECT OF EARTHQUAKE ON STRUCTURES BUILT ON RECLAIMED LANDS IN JABALPUR OF INDIA
- USING THE ANALYTIC HIERARCHY PROCESS AND GIS FOR DECISION MAKING IN RURAL HIGHWAY ROUTE LOCATION
- AN EXPERIMENTAL STUDY ON EFFECT OF REINFORCEMENT IN POLYMER AND FIBER FORMS ON CBR VALUE
- STABILIZATION OF BLACK COTTON SOIL WITH SAND AND CEMENT AS A SUBGRADE PAVEMENT
Last modified: 2016-05-25 17:35:03