REDUCTION OF STRESS CONCENTRATION BETWEEN PLATE CAM AND ROLLER FOLLOWER BY ROUNDING THE EDGES
Journal: International Journal of Mechanical Engineering and Technology(IJMET) (Vol.6, No. 10)Publication Date: 2015-10-26
Authors : ANIKET RAJE;
Page : 115-123
Keywords : Cam; Cam and Follower; Stress concentration; Iaeme Publication; IAEME; Mechanical; Engineering; IJMET;
Abstract
This paper focuses on reduction of the stress concentration between a cam and follower by rounding the edges. A cam and its follower are designed for carrying out a simple harmonic motion. A CAD model of the flat edged cam is made with dimensions obtained from design calculations , followed by finite element analysis. Similarly, another CAD model of similar cam with rounded edges is made with the same dimensions, followed by finite element analysis. It can be found that the equivalent stress concentration is less at the rounded edges of the second model than the flat edges of the first model.
Other Latest Articles
- STUDY OF SPECIFIC ENERGY METHOD OF BIT SELECTION ON THE BASIS OF DRILL BIT-DEPTH DATA IN UPPER ASSAM OIL FIELDS
- EXPERIMENTAL INVESTIGATION ON EXHAUST NOISE REDUCTION USING PARTICULATE TRAP IN DIRECT INJECTION (D.I.) DIESEL ENGINE
- EXPERIMENTAL INVESTIGATION ON EMISSION CHARACTERISTICS OF A MARINE DIESEL ENGINE WITH CATALYTIC CONVERTOR FOR COMPLIANCE WITH MARPOL REGULATIONS
- ANALYSIS OF PERFORMANCE AND EMISSION CHARACTERISTICS OF A DIESEL ENGINE FUELLED WITH BIODIESEL
- STUDY ON AIR QUALITY MANAGEMENT ISSUES AND POLICY REGULATIONS IN OIL AND GAS INDUSTRY
Last modified: 2016-05-25 19:58:24