STRENGTH CHARACTERISTICS OF CONCRETE WITH WASHED BOTTOM ASH PARTIALLY REPLACED FOR FINE AGGREGATE
Journal: International Journal of Civil Engineering and Technology (IJCIET) (Vol.6, No. 8)Publication Date: 2015-08-26
Authors : PRASANNA.V; A.ANNADURAI;
Page : 1-5
Keywords : Iaeme Publication; IAEME; Civil; Engineering; IJCIET; Washed Bottom Ash; Compression; Flexure;
Abstract
This paper was investigated on the possibilities of using Washed Bottom Ash (WBA) and its influence in mechanical properties of concrete. The experiment was done on normal strength concrete wit h grade chosen as M25. In order to find mechanical properties such as Compression, Splitting tension and flexure, Cubes, Cylinders and Prisms were cast respectively. Washed Bottom Ash was partially replaced for fine aggregate in percentages of 10%, 20%, 30%, 40% and 50% by weight. The usage of WBA on normal strength concrete was showed considerable improvement in compression and flexural properties. All tests and discussions are elaborate d better.
Other Latest Articles
- 0D TO 1D CREATION THROUGH CAD TOOLS
- THERMAL ANALYSIS OF MANGANESE (II) BAKELITE COMPOSITES
- A COMPARATIVE STUDY FOR SELECTION OF EFFECTIVE ELECTROLYTE SOLUTION FOR ELECTROCHEMICAL DISCHARGE MACHINING
- MECHATRONIC SYSTEM BASED MANUAL TRANSMISSION
- SIMULATION OF THERMODYNAMIC ANALYSIS OF CASCADE REFRIGERATION SYSTEM WITH ALTERNATIVE REFRIGERANTS
Last modified: 2016-05-26 19:51:05