PROPERTIES OF POLYSTYRENE RESIN REINFORCED BY CARBON FIBERS
Journal: Academic Research International (Vol.3, No. 3)Publication Date: 2012-11-15
Authors : Saleh Halbus Khudhair;
Page : 96-98
Keywords : Polystyrene composite; Tensile and impact properties.;
Abstract
Mechanical properties of the composite material based on polystyrene resin were investigated. Polystyrene resin was reinforced with (0, 15, 30, 45 and 60% by weight wt) carbon fibers. The tensile and impact properties of composites were determined by the tensile and impact tests. The maximum impact strength is (183Kj/m2 ) at the weight fraction of (60 % wt) of fibers, comparison with (8 Kj/m2 ) for virgin polystyrene material ,and the maximum tensile strength is (383Mpa) at the weight fraction of (60 % wt) of fibers , comparison with (37Mpa) for virgin polystyrene material.
Other Latest Articles
- INCREASING FLAME RETARDANCY FOR POLYETHYLENE RESIN REINFORCED BY HYBRID FIBERS BY USING SURFACE COATING LAYER FROM ZINC BORATE - ANTIMONY TRIOXIDE
- NON-NEWTONIAN MHD MIXED CONVECTIVE POWER-LAW FLUID FLOW OVER A VERTICAL STRETCHING SHEET WITH THERMAL RADIATION, HEAT GENERATION AND CHEMICAL REACTION EFFECTS
- STUDY OF MODELLING SPRAY PENETRATION OF BIODISEL FUEL UNDER TRANSIENT ENGINE CONDITIONS
- COUNTER FLOW HEAT EXCHANGERS' IRREVERSIBILITY MINIMIZATION
- EFFECT OF MICROBIAL ACTIVITY AND ENVIRONMENTAL FACTOR ON ASCORBIC ACID CONTENTS OF STORED TOMATO IN PASSIVE EVAPORATIVE COOLING STRUCTURES
Last modified: 2013-09-08 15:27:39