EVALUATION OF AGGREGATE AND MINERAL FILLER TYPES ON CHARACTERISTICS OF HOT MIX ASPHALT
Journal: International Journal of Civil Engineering and Technology (IJCIET) (Vol.6, No. 6)Publication Date: 2015-06-28
Authors : NAGLAA KAMAL RASHWAN;
Page : 213-222
Keywords : HMA; Aggregate type; Mineral filler; and Indirect Tensile Strength; Iaeme Publication; IAEME; Civil; Engineering; IJCIET;
Abstract
Aggregate properties can affect hot mix asphalt properties in different ways. Also, the filler plays an important role in asphalt mixtures behavior. This research represents a laboratory study of the effect of the aggregate type and mineral filler in hot mix asphalt (HMA). The aggregate types used in the mixtures were crushed limestone, crushed gravel and basalt. Two parameters were used to study the effect of the filler on HMA, the mineral filler type and content. Three types of mineral fillers used in the mix which were limestone powder, cement and hydrate limestone powder. The contents of fillers for this study were 4, 6 and 8%. Marshal tests and indirect tensile test were performed to investigate the difference in behaviors of different samples with different parameters that considered in this study. Also this study taking into account that the control mix contains crushed gravel, rough aggregate particles with medium gradation of aggregate and 4% of limestone powder as mineral filler.
Other Latest Articles
- EXPERIMENTAL STUDY OF EFFECTS OF POTASSIUM CARBONATE ON STRENGTH PARAMETERS OF CONCRETE
- TO INVESTIGATE COMBINED INFLUENCE OF STEEL FIBER AND SILICAFUME ON HIGH STRENGTH CONCRETE RIGID PAVEMENT
- SUSTAINABLE TRANSPORATION PLANNING ? A SYSTEMS APPROACH
- BEHAVIOUR OF STEEL STAGGERED TRUSS SYSTEM UNDER SEISMIC LOADING
- CHARACTERISTIC STUDY ON PERVIOUS CONCRETE
Last modified: 2016-05-26 21:37:13