SYNGAS PRODUCTION BY DRY REFORMING OF METHANE OVER CO-PRECIPITATED CATALYSTS
Journal: International Journal of Advanced Research in Engineering and Technology (IJARET) (Vol.6, No. 11)Publication Date: 2015-11-26
Authors : SANJAY P. GANDHI; SANJAY S. PATEL;
Page : 1-17
Keywords : CH4/CO2 reforming; percentage of Ni loading; Coke formation; FTIR; Iaeme Publication; IAEME; Technology; Engineering; IJARET;
Abstract
The syngas manufacturing from the reforming of methane with carbon dioxide is tempting because of output in terms of extra pure synthesis gas and lower H2 to CO ratio than other synthesis gas production methods like either partial oxidation or steam reforming. For production of long-chain hydrocarbons though the Fischer-Tropsch synthesis, lower H2 to CO ratio is required and important, as it is a most likely feedstock. In recent decades, CO2 utilization has become more and more important in view of the emergent global warming phenomenon. On the environmental point of view, methane reforming is tantalizing due to the reduction of carbon dioxide and methane emissions as both are consider as dangerous greenhouse gases.
Other Latest Articles
- DRY REFORMING OF METHANE OVER SUPPORTED NICKEL CATALYSTS PROMOTED BY ZERCONIA, CERIA AND MAGNESIA
- NOVEL AND ECO FRIENDLY ANT CHALK AND MOSQUITO MAT FROM COCONUT SHELL OIL
- GROWTH OF (E)-2-NITRO-3-PHENYLALLYL HYDROGEN SULFATE USING BAYLIS?HILLMAN DERIVATIVES CRYSTALS
- THE IMPACT OF MARINE BIOTECHNOLOGY FACING EMERGING CHALLENGES IN US COUNTRY
- THE IMPACT OF BIOTECHNOLOGY ON MARINE FUNGAL DIVERSITY
Last modified: 2016-05-30 19:48:27