EXPERIMENTAL INVESTIGATION ON THE PROPERTIES OF NANO-SILICA CONCRETE
Journal: International Journal of Civil Engineering and Technology (IJCIET) (Vol.5, No. 6)Publication Date: 2014-06-27
Authors : D. V. PRASADA RAO; K. JAYALAKSHMI;
Page : 116-124
Keywords : Iaeme Publication; IAEME; Civil; Engineering; IJCIET; Nano-Silica; Cement Replacement; Controlled Concr ete; Compressive Strength; Flexural Strength and Permeability;
Abstract
This paper presents the strength and durability properties of M20 and M25 grades of concrete prepared using Nano-Silica. The influence of Nano-Silica on various properties of concrete is obtained by replacing the cement with various percentages of Nano-Silica, i.e., 3%, 4.5% and 6% respectively. Compressive strength, tensile strength, flexural strength, modulus of elasticity and rap id chloride permeability tests were conducted on specimens prepared using Nano-Silica concrete. The tested results indicate that the replacement of cement with Nano-Silica influences the strength and permeability properties of concrete. The replacement of cement with 3% Nano-Silica results in higher strength and reduction in the permeability than the controlled concrete. The replacement of cement with Nano-Silica more than 3% results in the reduction of various properties of Nano-Silica concrete.
Other Latest Articles
- STUDIES ON UNPROCESSED STONE DUST AS FINE AGGREGATE IN MAKING CONCRETE
- OUT-OF-PLANE BUCKLING OF HIGHLY REINFORCED SEISMIC WALLS: DISPLACEMENTS AND MODE OF FAILURE
- STRENGTH PROPERTIES OF HIGH PERFORMANCE CONCRETE USING GGBS AND ROBO SAND
- Expression and Regulation of MuRF-1 and Atrogin-1 are Required for Skeletal Muscle Atrophy
- Pathology Encountered During Cadaver Dissection Provides an Opportunity for Integrated Learning and Critical Thinking
Last modified: 2016-06-07 21:11:25