THE MECHANISM OF FORMATION OF REDISPERSIBLE POLYMER POWDERS

In recent years, products based on gypsum binding materials is widespread, as their application allows to increase the productivity and quality of work. However, their production is constrained by lack of efficient dry additives. Domestic additives for adjusting the properties of gypsum binders are mainly in the liquid state. The use of imported additives increases the cost of products. One of the ways to obtain the dry additive is the use of polyvinyl acetate dispersion, which is widely used in liquid form to adjust the properties of cementations materials. But by the reworking to the dry condition the dispersion is aggregated. Furthermore, the additive does not have the required functional properties. The main problem of the production of dispersible polymer powders is development of the mechanism of their dispersion and film formation, and selection of regulators. So the stabilizers in the system prevent the coagulation of the emulsion (dispersion). Protective colloid provides obtaining of the dispersion powder, then is able to disperse in the water. And, finally, drying (moisture removal) leads to the film formation.