The NC Machining Post-Processing Technology Based on UG
Journal: International Journal of Science and Research (IJSR) (Vol.2, No. 9)Publication Date: 2013-09-15
Authors : Sharifa Magambo; Liu Ying;
Page : 131-134
Keywords : UG CAM; UG/Post; Post Builder; FANUC NC System;
- Teaching TRIZ Problem-Solving Methodology in Higher Education: A Review
- TRIZ as a Problem-Solving Approach for Architectural Design Education: The Case of Jordan
- Implementation of active teaching and learning methodology in the nursing course at a higher education institution: Literature review
- Learning the Methodology of Mathematical Problem Solving in Elementary Education
- THEORY OF INVENTIVE PROBLEM SOLVING (TRIZ) CASE STUDY: DEVELOPMENT OF A HYBRID SEAWATER DESALINATION PROCESS
Abstract
Post-processing technology is the key to CNC automatic programming technology and an important module of the CAD / CAM system. Post-processing technology converts the NC program that is produced by the CNC automatic programming tool into the file that can be identified by CNC system. Moreover, the generated tool path files must match with the CNC system. Post-processing techniques and UG software are briefly introduced. Using them, a post-processor for FANUC CNC systems is created. The program that generated by the special processor is contrasted with the general processor. The results illustrate that using the dedicated post-processor in engineering applications can improve programming efficiency and processing reliability.
Other Latest Articles
- Vehicle Tracking System Using GPS
- A Survey Study of Anthropometric Characters of Malnourished Children of Slum Dwellers in Indore City
- Concurrent Online Test of RFID Memories Using MBIST
- Security in Vehicular Ad Hoc Networks through Mix-Zones Based Privacy
- A Repetitive Sparce Matrix Converter with Z-Source Network to having less Current THD
Last modified: 2013-10-01 22:48:42