ResearchBib Share Your Research, Maximize Your Social Impacts
Sign for Notice Everyday Sign up >> Login

Numerical Analysis of Premixed Combustion in Heating Plate by T-type Ejector

Journal: International Journal of Engineering Research (IJER) (Vol.5, No. 8)

Publication Date:

Authors : ; ; ;

Page : 662-665

Keywords : Heating plate; T-type ejector; Partially premixed combustion; Numerical simulation;

Source : Downloadexternal Find it from : Google Scholarexternal

Abstract

A T-type ejector was developed to replace conventional spray nozzle in engineering. The gas of c3h8 and air gets a complete mixing in the T-type ejector. The mole fraction of c3h8 changes from 3.14% to 3.3% as the inlet pressures of c3h8 gas change from 20000 to 120000 Pa and it revealed that the mole fraction of c3h8 is not sensitive to inlet pressure. To evaluate the heat transfer performance, the premixed combustion of propane and air was studied by both of numerical calculation and experiment. The combustion is stable in the case of this article and the surface heat transfer coefficient of the paving plate is decreased gradually from time 100 s to 800 s. The temperature of paving plate shows gradual downward trend in 460-385 k after combustion heating 300 s. As a result, the numerical analysis model in this article can be used to predict the temperature of the paving plate of asphalt paver when using T-type ejector. This paper is supported by Hunan Provincial Natural Science Foundation of China (14JJ3149).

Last modified: 2016-08-08 16:02:21