ResearchBib Share Your Research, Maximize Your Social Impacts
Sign for Notice Everyday Sign up >> Login

Paper On Design and Analysis Of Bending Furnace Using Alternative Fuels

Journal: GRD Journal for Engineering (Vol.1, No. 7)

Publication Date:

Authors : ; ;

Page : 64-77

Keywords : FURNACE WALL; TRANSIENT HEAT TRANSFER; LDO; COAL; LPG; INSULATION.;

Source : Downloadexternal Find it from : Google Scholarexternal

Abstract

The aspect of heat transfer which in itself requires an elaborate model is considered here. Taken Into account are the convection and radiation between gas and brick wall, and the conduction from bricks to light diesel oil as a fuel used in this paper. by taking minimum heat loss rate (HLR) as optimization objective. Two boundary conditions of the insulation layers, convective heat transfer and combined convective and radioactive heat transfer, are taken into account. The optimal constructs of the insulation layers with the two boundary conditions are obtained. Improvement of energy efficiency of the most consuming facilities was achieved by improving the use of alternative energy minimization such as reducing the heat lost of hot gases, minimizing the heat radiated through refractory linings of metallurgical furnaces. citation: RAMESH DEORAOJI BOKDE, VIDARBHA INSTITUTE OF TECHNOLOGY, NAGPUR; Vaibhav H. Bankar ,VIDARBHA INSTITUTE OF TECHNOLOGY, NAGPUR. "Paper On Design and Analysis Of Bending Furnace Using Alternative Fuels." Global Research and Development Journal For Engineering 17 2016: 64 - 77.

Last modified: 2016-11-11 16:46:06