APPLICATION OF MSC ADAMS ? NX NASTRAN/FEMAP INTERFACE IN STRENGTH CALCULATIONS OF TRUCK FRAMES
Journal: Scientific Journal of Silesian University of Technology. Series Transport (Vol.91, No. 91)Publication Date: 2016-06-01
Authors : Adam PRZEMYK; Andrzej HARLECKI; Tomasz GANCARCZYK;
Page : 113-123
Keywords : truck; frame; dynamics; FEM; MSC Adams; NX Nastran/Femap;
- APPLICATION OF MSC ADAMS ? NX NASTRAN/FEMAP INTERFACE IN STRENGTH CALCULATIONS OF TRUCK FRAMES
- Modeling of a piled foundation in a Femap with NX Nastran
- Design, Modeling&Analysis of Helical Gear According to Bending Strength Using AGMA and FEMAP
- STRENGTH AND BUCKLING ANALYSIS OF A COMPOSITE WING STRUCTURE USING MSC.PATRAN AND MSC.NASTRAN
- Atomistic Calculations of Interface Properties for Co-Al-W Alloys
Abstract
In this paper, the finite element method (FEM) is used to calculate the strength of truck frames by integrating the MSC Adams software, for dynamics analysis of mechanical systems, and the NX Nastran/Femap software. At the same time, a method for reducing degrees of freedom is been developed based on the Craig?Bampton method. The interface is applied in order to calculate the strength of the frame in the selected truck, which runs on the test track. The selected model of truck can be treated as the virtual prototype that is useful in the design process.
Other Latest Articles
- DESIGN OF A COMPACT DUAL-PURPOSE STARTING CLUTCH IN THE DRIVE OF A PROTOTYPE VEHICLE
- INFLUENCE OF THE FACE WIDTH AND LENGTH OF CONTACT ON TEETH DEFORMATION AND STIFFNESS
- SPECIAL DEVICE FOR CONTINUOUS DECELERATION OF FREIGHT CABLEWAY TRUCKS
- KINEMATIC LINKAGES IN THE HINGED UNDERCARRIAGE OF A
- INCREASING DURABILITY IN STEEL WIRE ROPE INSTALLED IN SPECIAL TRANSPORT EQUIPMENT
Last modified: 2016-10-28 12:36:47