Analysis of conditions for contacting tooth end mills with cylindrical piece
Journal: Journal of Engineering Sciences (Vol.1, No. 4)Publication Date: 2015-11-03
Authors : Yu. N. Vnukov; S. I. Djadja; E. B. Kozlova; N. N. Chernovol;
Page : A1-A7
Keywords : thin-wall component; cylindrical end mill cutter; cutting time per one tooth; analysis of cutting time per one tooth;
Abstract
The theoretical formulas for determination of cutting time per one tooth and time of idling, when in time of end mill cutter rotation previous tooth already came out from the cutting area, and next one had not yet entered, were received. The ratio of this times in many respects determines the dynamic conditions of milling process. Influence of instrument's size and geometry, and also a milling conditions on cutting time per one tooth and time of idling was analyzed. Results of the analysis allow purposefully to change the conditions of excitation and relaxation of vibrations when milling thin-wall element, if its real rigidity and value of natural vibration period are known
Other Latest Articles
- SUBSTANTIATION TO IMPROVE ENERGY EFFICIENCY PLATFORM FOR A TOURISM COMPANY
- VOLTAGE STABILITY ASSESSMENT FOR WIND FARMS INTEGRATION INTO ELECTRICITY GRIDS WITH AND WITHOUT CONSIDERATION OF VOLTAGE DEPENDENT LOADS
- RESEARCH ON THE AERODYNAMICS OF BLADE PROFILES OF WIND TURBINES
- A REVIEW ON COUNTER-ROTATING WIND TURBINES DEVELOPMENT
- STUDY OF SOME INSULATING OILS AGING BY THERMAL CYCLING
Last modified: 2016-11-07 03:48:10