Obtained regression model of dependence changes in the parameters of perlite on the cooling rate
Journal: Construction, materials science, mechanical engineering (Vol.3, No. 80)Publication Date: 2015-03-24
Authors : V. І. Bolshakov; D. V. Laukhin; A. V. Beketov; І. А. Tyuterev;
Page : 79-85
Keywords : structure; The fine structure; interlamellar distance; regression models; quasi-Newton method residues;
Abstract
Purpose. Construction of regression models describing the change of parameters kvazievtektoida and hardness of the cooling rate of the austenite low-carbon low-alloy steels. Methodology. The material for this study was selected low-carbon lowalloy steel 09G2S. The structure, fine structure and hardness of the steel after different treatments laboratory. Based on these data the regression model of the relationship between the parameters and the hardness of the pearlite structure by heat treatment conditions (cooling rate). Findings. Research efforts showed change the pearlite structure of the steel component 09G2S depending on the cooling rate. Thus, it is not revealed significant changes in the morphology of the ferrite component. Obtained regression model of the relationship interlamellar distance in pearlite and hardness of the cooling rate. Originality. Steel 09G2S established a quantitative relationship between the parameters of pearlite component (interlamellar distance) and properties (hardness). Practical value. Understanding the mechanisms of structural changes and to obtain quantitative laws describing the formation of structural components, enables you to control the structure and properties of the finished metal products for the construction of metal structures.
Other Latest Articles
- Experimental determination of the specific volume phases n the intercritical interval of temperatures by heat treatment of low carbon steel
- Influence of temperature annealing on the formation of special boundaries in armco-iron
- Analysis of the temperature-humidity parameters of structural assembly ?balcony slabs - walling - floor slabs? where efficient thermal insulation
- Assessment of radiation hazardous according to recommendations of the international commission on radiological protection
- On the simplified method ofcalculating the reinforced concrete columns of the braced frame with uniaxial bending according to dbn b.2.6.98:2006 and en 1992-1-1
Last modified: 2016-11-09 20:26:43