ResearchBib Share Your Research, Maximize Your Social Impacts
Sign for Notice Everyday Sign up >> Login
Archived Papers for Journal

Tribology in Industry >>

Vol.41, No.4

Publisher: Faculty of Engineering, University of Kragujevac, Serbia

Publishing Date: 2019-12-15

  1. Tribological Behavior of Thermally Sprayed Coatings with Different Chemical Composition and Modified by Remelting

    Authors: E. Zdravecká M. Ondáč J. Tkáčová

  2. Oil Film Thickness Measurements Combined with High Temperature Friction Investigations in a Simplified Piston-Ring Lubrication Test Rig

    Authors: P.S. Dellis

  3. Influence of Substrate Bias Voltage on Structure, Morphology and Mechanical Properties of AlCrN Coatings Synthesized Using Cathodic Arc Evaporation

    Authors: A. Gilewicz R. Jedrzejewski P. Myslinski B. Warcholinski

  4. Effect of Load, Sintering Temperature and Reinforcement Concentration on Al-Si/γ-Al2O3/GNP Self-Lubricating Hybrid Composite

    Authors: P.D. Srivyas Charoo

  5. Effect of Nitrile Butadiene Rubber (NBR) on Mechanical and Tribological Properties of Composite Friction Brakes

    Authors: E. Surojoa D. Ariawan R. Arsada N. Muhayat W.W. Raharjo D.F. Smaradhana

  6. Method of Accelerated Testing of Crankshaft Shells of the Combustion Engine in the Operating Process

    Authors: O. Grytsyuk O. Vrublevskyi

  7. Experimental Studies on Mechanical and Wear Behaviour of TiC Reinforced Cu-Sn-Ni Functionally Graded Composite

    Authors: N. Radhika M. Sam S. Thirumalini

  8. Determination of the Rational Composition of the Additive to Oil with the Use of the Katerynivka Friction Geo Modifier

    Authors: V. Aulin O. Lyashuk A. Hrynkiv S. Lysenko T. Zamota Y. Vovk A. Pankov A. Tykhyi A. Horkunenko

  9. Mechanical and Tribological Analysis of Anodized AZ31 Magnesium Alloy as a Function of a Cement Concrete Environment

    Authors: J.C. Caicedo S. Quiñonez W. Aperador

  10. Effect of Sintering Temperature and Reinforcement Concentration on the Tribological Behaviors of Hybrid Aluminum Matrix Nano Composite

    Authors: P.D. Srivyas Charoo

  11. Parameters of Internal Combustion Engine Efficiency While Introducing Additives in the Oil

    Authors: A. Gritsenko E. Zadorozhnaya V. Shepelev I. Gimaltdinov

  12. Investigating the Adhesive Wear Properties of Aluminum Hybrid Metal Matrix Composites at Elevated Temperatures Using RSM Technique

    Authors: C. Aravind S. Gopalakrishnan N. Radhika

  13. Wear Characteristics of Recycled Cast Al-6Si-3Cu Alloys

    Authors: F.M. Mwema J.O. Obiko T. Leso T.O. Mbuya B.R. Mose E.T. Akinlabi

  14. Mechanical and Tribological Behavior of Woven Sisal Fabric

    Authors: M. Nagamadhu P. Jeyaraj G.C. Mohan Kumar

  15. Evaluation of the Surface Roughness of Ti-6Al-4V for Surface Grinding under Different Cooling Methods Using Conventional and Vegetable Oil-based Cutting Fluids

    Authors: K.N. Ronoh N.W. Karuri F.M. Mwema H.T. Ngetha S.A. Akinlabi E.T. Akinlabi