ResearchBib Share Your Research, Maximize Your Social Impacts
Sign for Notice Everyday Sign up >> Login

Engineering Characterisation of Aggregates from Some Selected Areas in Kumasi, Ghana

Journal: International Journal of Advanced engineering, Management and Science (Vol.4, No. 4)

Publication Date:

Authors : ;

Page : 295-304

Keywords : aggregates; engineering; characterisation; rock; granite; Kumasi.;

Source : Downloadexternal Find it from : Google Scholarexternal

Abstract

The increase in engineering projects translates to an increase in demand for construction materials, for example, aggregates which are a major component in concrete works. There are many quarries in the Kumasi area which produce aggregates for use in construction works. However, there is no readily available information on the geological and geotechnical properties of these aggregates for use by engineers during the planning, design and construction of projects. This project therefore sought to characterise the aggregate from selected areas (close to some major quarries) in Kumasi based on their geological and engineering properties for construction purposes. Results of the study indicate that Aggregates from sampling locations KP and CS passed the FI test with those from CS being the only ones to pass for EI, making them the best aggregates in terms of Flakiness and Elongation Indices. The aggregates from all the sampling locations passed for the Specific Gravity and Water Absorption tests with CS aggregates giving the best results indicating high strength and good rate of water absorption. Aggregate from sampling location NM gave the best result for the Aggregate Impact Value test indicating high resistance to sudden impacts and shocks. With the Ten Percent Fines Value and the Aggregate Crushing Value Tests, CS yet again produced the aggregates with the best results. The aggregate gave a very high result even under the wet/soaked condition when all the others were giving very low results. Aggregates from this sampling locations can withstand loading gradual compression better than the rest. Finally, the KP aggregates gave the best results for the Los Angeles Abrasion Value which suggests such materials to be the hardest and toughest to resist crushing, degradation and disintegration. Aggregates from the CS, however gave the second best results. From the study, it was concluded that the most suitable location to obtain good quality aggregates is around CS as its aggregates gave the best results in almost all the tests.

Last modified: 2018-05-10 03:27:16