Research, Design and Manufacture of Seal Binding Automechanism for 6 Pronged Plastic Seals

In this paper, the author presents the result on researching, designing and manufacturing a seal bing mechanism for 6 pronged plastic seals to apply in laser engraving lines of logos, barcodes, codes ... with automatic 6 pronged plastic seals. Unlike the conventional clamping machenism that require two clamping and rotating mechanisms for twisting, this seal binding mechanism is designed to integrate and connect the clamping mechanism to the rotating mechanism, therefore, the structure is compact and effective. The seal binding mechanism is implemented during the process of collecting seals, if achieved, 10 seals will clamp and twist the wire to bind seals each bundle with each bundle of 10 seals in 14 seconds, the number of twisted turns when binding from 4 to 5 turns. In order to ensure a reliable and stable working process, the twisting machenism is designed and used with a sensor to count the number of turns, the angle of twist to release the clamp. These processes are programmed by PLC for control. Nguyen Hong Son | Nguyen Manh Thang | Nguyen Ðinh Hai | Vu Hoai Bac | Pham Thi Thao | Vu Van Duy "Research, Design and Manufacture of Seal-Binding Automechanism for 6-Pronged Plastic Seals" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-4 , June 2020, URL: https://www.ijtsrd.com/papers/ijtsrd31177.pdf Paper Url :https://www.ijtsrd.com/engineering/mechanical-engineering/31177/research-design-and-manufacture-of-sealbinding-automechanism-for-6pronged-plastic-seals/nguyen-hong-son