Implementasi Sistem IP PBX menggunakan Briker

VoIP (Voice over Internet Protocol) is a long-distance voice communications over IP networks are used. In this study, IP PBX systems designed using VoIP -based technologies. IP PBX is a telephone switching device and data communication technology-based Internet Protocol (IP) which controls the analog phone extensions and IP Phone extensions. VirtualBox software is used in order to make it easier for the Linux operating system to create a program which is using briker IP PBX that works on Linux 2.6 Operating System. After the installation process is done briker on Virtualbox IP PBX network implementation. After implementing the IP PBX network according to the topology, and then do a test call success rate and analysis of Quality of Service (QoS). Measurement of QoS parameters using jitter, delay, and packet loss resulting in the IP PBX system. Jitter value briker fellow users (either on a smartphone or computer) has been on the average value of 16.77 ms. While the values ??obtained packetloss when there is 1 user when a phone caller is 0%. While the percentage of packet loss at user 1 as a telephone receiver is 0.01%. Delay value when communicating between users located at 11.75 ms. Overall value obtained through this study , where the results of testing the QOS parameters in accordance with the standards recommended by the ITU and the QoS values ??obtained with the results "good".