ResearchBib Share Your Research, Maximize Your Social Impacts
Sign for Notice Everyday Sign up >> Login

Main Menu

Searching By

PARTNERS

Contact us

Archived Papers for Journal

Construction, materials science, mechanical engineering >>

Vol.1, No.80

Publisher: SHEE

Publishing Date: 2015-03-24

  1. Scientific school academic K. F. Starodubov and its modern continued

    Authors: Shpakovskaya T.A.

  2. Assessment of the residual service life working in hostile environment

    Authors: Arkhipov О.G.; Liubymova-Zinchenko O.V.; Ivanchenko V.V.; Shtonda YU.M.

  3. Methods of rising corrosion resistance of duplex steel tubes

    Authors: Atanasov V.R.; Panchenko S.А.; Bolshakov V.I.; Dergach Т.А.

  4. The analysis of macro- and microstructure of the railway wheels made by different manufacturing methods

    Authors: Babachenko A.І.; Knysh А.V.; Kononenko A.A.; Dement'eva Zh.A.; Shpak E.А.; Klinovaya О.F.

  5. Macroheterogeneous composites based on AI65C020CU15 quasicrystal alloy

    Authors: Bashev V.F.; Sukhova O.V.; Syrovatko Yu.V.

  6. Structure formation and magnetiec .properties of Co-Fe-Ni-Si-B films, obtained by the splat-quenching

    Authors: Bashev V.F.; Kutseva N.A.; Delov V.V.

  7. Effect of cooling rate on the properties of multicomponent alloys of Al-Cu-Fe-Ni-Si system

    Authors: Bashev V.F.; Kushnerov O.І.

  8. Control high radiation in the workplace

    Authors: Bielikov А.S.; Rahimov S.Yu.; Shalomov V.A.; Chaplyhin О.S.

  9. Assessment of radiation hazardous according to recommendations of the international commission on radiological protection

    Authors: Belikov А.S.; Pilipenko А.V.; Stepanova А.V.; Vishnevsky А.S.

  10. Analysis of the temperature-humidity parameters of structural assembly ?balcony slabs - walling - floor slabs? where efficient thermal insulation

    Authors: Berezyuk А.N.; Dikarev K.B.; Skokova A.A.; Kuzmenko A.N.

  11. Influence of temperature annealing on the formation of special boundaries in armco-iron

    Authors: Bolshakov V.І.; Sukhomlin V.І.; Voloh V.І.

  12. Experimental determination of the specific volume phases n the intercritical interval of temperatures by heat treatment of low carbon steel

    Authors: Bol'shakov V.І.; Sukhomlin G.D.; Tkach T.V.; Laukhin V.D.

  13. Obtained regression model of dependence changes in the parameters of perlite on the cooling rate

    Authors: Bolshakov V.І.; Laukhin D.V.; Beketov A.V.; Tyuterev І.А.

  14. Development of new types of sheet piles profiles

    Authors: Bolshakov V.І.; Nosenko О.P.

  15. The effect of vibrational impact of low power density on the morfology of hypereutectic silumins

    Authors: Bolshakov V.І.; Rott N.О.

  16. Influence of chemical components on the mechanical properties of steel 110G13L

    Authors: Bolshakov V.І.; Yushkevich О.P.; Nosenko О.P.

  17. Influence of energy per unit length of hybrid laser-arc welding on structure and mechanical properties of welded joints of high strength steels

    Authors: Bushma O.І.; Berdnikova О.М.; Khaskin V.Yu.; Pozniakov V.D.; Sydorets V.М.

  18. Influence of forms and final size of abrasive surface finish

    Authors: Vashekevich F.F.; Spilnik A.Y.; Zagorodny О.B.; Zvonarev К.І.

  19. Steel, non-metallic inclusions, laser action, strengthening, gradiental and composite zones

    Authors: Gubenko S.I.; Nikulchenko I.О.

  20. The influence of dislocation and grain structure on the formation of intergranular cracks in centrifugal-cast billets (steel grade 40Х25Н20С2)

    Authors: Gubenko S.І.; Bespalko V.N.; Yurkovsky V.V.; Baleva Y.І.

  21. Perspective directions of development of technologies of thermal work-hardening of pipes of petroleum assortment

    Authors: Gul Y.P.; Chmeleva V.S.; Ivchenko A.V.; Kondratenko P.V.

  22. Foundation of the expediency for the secondary use of resources during the demolition of emergency civil buildings

    Authors: Dmitrenko І.S.; Martysh A.A.; Tsenatsevish T.О.; Ayat N.І.

  23. Development of algorithm of analysis of the state of corrosive and mechanical destruction of the object

    Authors: Eliseev P.I.; Arhipov A.G.; Ljubimova-Zinchenko О.V.; Karpjuk L.V.; Zaika R.G.

  24. Principles of formation of high-rise building

    Authors: Zaiats I.І.

  25. The optimization of chemical composition of heatproof basis of bimetallic purveyance

    Authors: Zolotarev G.A.; Sheyko S.P.; Mishchenko V.G.

  26. Structure and properties of modified heat-resistant alloy

    Authors: Kalinina N.E.; Uhimenko A.E.; Kalinin T.V.

  27. Melting refractory particles inoculators carbide and titanium nitride in the metal melt

    Authors: Kostin V.А.; Alekseenko І.І.; Gurniko A.A.

  28. Analysis of the methods for determining of the duration of the residential complex reconstruction

    Authors: Kravchunovska T.S.; Dadiverina H.V.

  29. Critical stresses of radial stability of flexible circular ring with initial plastic bending strains

    Authors: Lazariev І.V.

  30. Role of structural-phase condition in change of service properties of welded joints from complexly alloyed alloys

    Authors: Markashova L.І.; Poklaytskii A.G.; Kushnareva O.S.

  31. Parameters control of steel diffusion layer in the process of thermochemical treatment

    Authors: Meniailo О.І.; Mishchenko V.G.

  32. Strength as the basis of structural reliability of steel and alloys

    Authors: Meshkov Yu.Ya.

  33. The effect of the surface quality of the material on the operational properties of the heating elements

    Authors: Mishchenko V.G.; Tutyk V.A.; Grechka A.V.

  34. Application of micro- and ultrafiltration at the stage biological treatment, tertiary sewage treatment

    Authors: Nechitailo М.P.; Nagornaya H.K.

  35. Modeling of 3-d printing using non-spherical hydrogenated - dehydrogenated titanium powders

    Authors: Ovchinnikov А.V.; Dzhugan А.А.; Shevchenko А.V.; Yanko Т.B.; Sidorenko M.V.; Seliverstov A.G.

  36. The kinetics of bainite structure formation in lowcarbon complex-alloyed steel during a cooling process

    Authors: Oliinyk I.V.; Evsyukov М.F.; Chmeleva V.S.; Dement'eva ZH.A.

  37. The resulting complex ligatures for synthesis complexly titanium alloys by powder metallurgy

    Authors: Pavlenko D.V.; Оvchinnicova І.А.; Davudov S.I.; Skrebtsov A.A.; Kapustyan A.E.

  38. Effects of crystallography and dispersibility of plate pearlite in wire rod to the structure and properties of the wire

    Authors: Parusov Е.V.; Parusov V.V.; Sukhomlin G.D.; Sahura L.V.; Chuyko I.N.

  39. Investigation of thermal and structure factors influence on formation of submicrocrystalline structure in oxygen alloyed titanium

    Authors: Perepolkina M.N.; Glotka Т.A.; Shevchenko V.G.; Kovalenko T.O.; Omelchenko O.S.

  40. Investigation of crystallization processes Fe-B-C alloys

    Authors: Pilyaeva S.B.; Filonenko I.Yu.; Baskevich A.S.

  41. Structure and mechanical properties of HAZ metal of 10G2FB steel joints after welding and bending cyclic loading

    Authors: Pozniakov V.D.; Markashiva L.І.; Berdnikova О.М.; Maksymenko A.О.

  42. Assessment of meteorological factors on the air pollution in the Dnepropetrovsk city (illustrated formaldehyde)

    Authors: Polishchuk S.Z.; Dotsenko L.V.; Demidenko A.S.

  43. Structural and phase transformations in alloy hypereutectic AL-18,5 % SI, processed liquid state periodic pulse electric shock

    Authors: Prigunova A.G.; Petrov S.S.; Koshelev M.V.; S.V.Prigunov; Kluchnic D.N.; Tretkov A.I.

  44. Modeling the process of high thermal radiation on the basis of irradiance

    Authors: Rabich H.V.; Chumak L.А.; Lauhyna L.N.; Ragimov C.Yu.

  45. Analysis of the kovalevskiy park and the cantonment in kirovograd

    Authors: Revskiy І.S.; Verbitskaya A.S.

  46. Problems and perspectives of application of composite materials in aircraft

    Authors: Savchenko V.A.

  47. The researching of physical-mechanical properties of intermetallic catalysts obtained in shs conditions

    Authors: Sereda B.P.; Belokon Y.A.; Belokon K.V.; Sereda D.V.

  48. Getting hromoalitirovannyh coatings on carbon materials in self-propagating high-temperature synthesis

    Authors: Sereda B. P.; Belokon Y. A.; Sereda D. B.; Kruglyak І. V.

  49. Increasing of the contact fatigue of bearing components made of steel EI-347SH

    Authors: Sidorenko M.V.

  50. Formation of the first portions of є- and а ' deformationinduced martensite in chromium-nickel steels of the austenitic class

    Authors: Snizhnoi G.V.; Mishchenko V.G.; Snizhnoi V.L.

  51. Effect of modification by titanium aluminide powder on the structure of aluminum castings

    Authors: Trotsan А.І.; Kaverinsky V.V.; Brodetsky І.L.

  52. Substantiation of rational replacement material for connecting hoses brake system of railways rolling stock

    Authors: Uzlov K.I.

  53. Research on the possibility of controlling the properties of the structural steel surface hardening methods

    Authors: Cheiliakh A.P.; Karavaiev N.E.

  54. The influence of thickness blanks for car drives on the structure and properties of steel 10ХФТБч

    Authors: Sheyko S.P.

  55. Theoretical investigation of ground deflected mode after cementation

    Authors: Shekhorkina N.E.

  56. Evaluation of structural quality titanium alloys for their ability to resist the fragility under stress concentration

    Authors: Shiyan A.V.

  57. Structural and mechanical embrittlement of titanium alloys under stress concentration

    Authors: Shiyan A.V

  58. Concrete polished floors with seal

    Authors: Spirko N.V.; Bondarenko S.V.; Sevastyanova O.Е.; Bondarenko A.S.

  59. Study of residual stresses in welded joints using the blind hole drilling method

    Authors: Lyaturinsky V.О.; Sidorenko M.V.

  60. Prospects for industrial use titanium aluminide in aeroengine

    Authors: Kulykovskyi R.A.; Pakholka S.N.; Pavlenko D.V.

  61. Elimination of inequigranularity in gas turbine engine compressor blades by means of intensive plastic deformation

    Authors: Boguslayev V.A.; Kotsiuba V.YU.; Pavlenko D.V.; Tkach D.V.