Wear and Friction Behavior of Stir Cast Al-TiB2 Metal Matrix Composites with Various Lubricants
Journal: Tribology in Industry (Vol.38, No. 4)Publication Date: 2016-12-20
Authors : S. Poria; G. Sutradhar; P. Sahoo;
Page : 508-521
Keywords : Al-TiB2; Metal matrix composites; Wear; Coefficient of friction; Lubricant;
Abstract
Al- TiB2 metal matrix composites are fabricated using stir cast method and its tribological characterization is done using three different lubricants. Tribological studies are performed in a multi-tribotester using block-on-roller configuration under 25-75 N loads and 400-600 rpm rotational speeds. Four different weight percentages of TiB2 are considered in this study. Comparison between dry condition and lubricated conditions is gleaned to differentiate wear and friction characteristics and SEM images are taken to fortify them. Lubricated conditions yield large reduction in wear and friction compared to dry condition.
Other Latest Articles
- Tribological Studies of Antiwear Antifriction Composition and its Application
- CLINICAL SIGNIFICANCE OF NITRIC OXIDE METABOLITES IN THE DEVELOPMENT OF ENDOTHELIAL DYSFUNCTION IN CHILDREN WITH BRONCHIAL ASTHMA
- Slurry Erosion Behavior of Destabilized and Deep Cryogenically Treated Cr-Mn-Cu White Cast Irons
- Study of Surface Wear and Damage Induced by Dry Sliding of Tempered AISI 4140 Steel against Hardened AISI 1055 Steel
- ENVIRONMENT AS A RISK FACTOR OF DEVELOPMENT OF ALLERGIC DISEASES IN CHILDREN
Last modified: 2017-01-12 22:50:20