Optimization and Analysis of Process Parameters in Micro-Drilling using Response Surface Methodology
Journal: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) (Vol.7, No. 6)Publication Date: 2018-12-31
Authors : Ranadhir R. Landge; Atul B. Borade;
Page : 297-304
Keywords : Micro-drilling; Cutting tool; Material removal rate; Response Surface Methodology; Design of Experiment; Box-Behnken Design; Analysis of Variance; Regression & RSM Model;
Abstract
High precision and high spindle speed applications is one of the most significant factors in fundamental technologies in machining processes, which is of good productivity and quality. When the basic machining process, ‘drilling' is performed below 1mm hole diameter, it is called, “Micro-Drilling”, which is the precision hole drilling process. This study deals with Response Surface Methodology approach in Micro-drilling machine for optimizing the material removal rate. Drilling is performed on Brass material with machining parameters as Feed, Speed, Machining time and Depth of hole. The experiments were conducted with Box-Behken Design method based on response surface design. Analysis of variance (ANOVA) was used to determine the effect of the parameters after getting the values of MRR. The interaction of their parameters was also considered to be important. Regression analysis was performed and for MRR, a Linear model was fitted. This was done considering the significant interactions and the parameters. Finally, optimization was performed using desirability approach and experiments for confirmation were conducted
Other Latest Articles
- Wave-Likelocomotion of a Snake Robot: Mathematical Modelling and Simulation
- Case Study on Illegal Sand Mining in Tamil Nadu: Alternate Solution by Replacing Natural Sand by M-Sand
- Waste Pyrolysis Tire Oil as Alternative fuel for Diesel Engines
- Development and Study of Tribological Properties of Biocomposite for Brake Pad Application
- Comparison of Power Output’s of Different Blends of Pyrolysis Plastic Oil & Diesel with Pure Diesel on Single Cylinder 4-S (VCR) Diesel Engine
Last modified: 2018-01-13 19:39:10