Fabrication of Oil Separator in Industry
Journal: International Journal of Science and Research (IJSR) (Vol.3, No. 6)Publication Date: 2014-06-15
Authors : Naveen V Devanagoudar; Hemanth kumar T R;
Page : 56-57
Keywords : Oleophilic belt; Gear motor; Separator; U-Block bearing; Spur gear;
Abstract
"This paper deals with the separation of oil from refinery industries, sugar factories and many small scale industries to find out the better solution for oil recovery from the water surface to produce oil free water. Also deals with the fabrication of mechanical equipment to separate oil from the water.
Oil and water separator is mechanical equipment, which is used in the environment pollution control from oil spillage. Oil separator helps in removing the oily from the waste water. By removing the oil from waste water, it becomes free of oil pollution. This is mainly due to oleophilic material used in the oil separator. This oil separator can be used in the effluent treatment plant. This project consists of construction, fabrication details, assembly, working and applications of oil and water separator. The belt speed, oil recovery rate and oil recovery efficiency are the operating parameters of oil separator. The oil recovery rate and the oil recovery efficiency, the two most important parameters displayed the performance of the oil separator."
Other Latest Articles
- Stabilization of Vegetable Market Waste through Vermicomposting
- Survey Paper on Optimum Selection of Ga Algorithm’s Parameters for Software Test Data Generation
- Low Power Circuit Design Using Positive Feedback Adiabatic Logic
- Assessment of Cr+6 Accumulation and Phytoremediation Potential of Three Aquatic Macrophytes of Meghalaya, India
- Planktonic Foraminifera from Vridhachalam area, Cauvery Basin, South India, Tamil Nadu
Last modified: 2014-06-20 16:06:04