Design and Fabrication of Little gourd cutter

Plywood base was used as a platform to place the entire equipment. Stainless steel blade was attached to the shaft of motor of 240V which acts as cutting unit. Stainless steel cylinder with supporting iron rod is used for feeding little gourds. A rectangular frame made up of metallic stands was used as main frame and supporting main units. A collection tray made up of metal sheet was used for collection of slices. Moisture content of little gourds was 85%. The dimensions of little gourds were measured using digital Vernier callipers and weight of each little gourd was measured using electronic weighing balance. Average length and diameter of little gourds were found to be 17.93mm and 18.88mm respectively. The other parameters like Sphericity, roundness, cylindrical and elliptical were found to be 0.14cm, 3.73cm2, 19.87cm3 and 0.89cm-3 respectively. Average weight of the little gourds were found to be 16.5g. The surface area and bulk density of little gourds were found to be 180.6 sq.cm and 500 kg/m3. Performance evaluation of little gourd cutter was performed where slicing operation was performed at different motor speeds and voltages. High motor speed with voltage of 240V gave slices of 0.75mm which were suitable for household consumption.