ELIMINATION OF DRILL BREAKING ISSUE DURING OIL HOLE DRILL IN VOLVO CRANK SHAFT
Journal: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) (Vol.8, No. 4)Publication Date: 2018-08-31
Authors : RUPESH. P. L K. RAJA M. THAMARAIKANNAN; K. LOGESH;
Page : 625-634
Keywords : Burr; Coolant; Pilot Drill & PM Analysis;
Abstract
During the manufacture of crankshaft for Volvo heavy vehicles, oil holes drill is essential for lubrication purpose. Drill bits are used for the above drilling purpose. The drill bits break due to abnormalities such as coolant pressure, drill cutting edge blunt, rigidity etc. To eliminate this breakage issue, some of the essential parameters such as point angle, honing angle, lip height etc. of drill nomenclature as well another factor like coolant, speed, machine malfunction etc. are modified. This project deals with breakage analysis of existing drill bit due to vertical machine parameters and constituent conditions of the machine during drilling.
Other Latest Articles
- DESIGN AND ANALYSIS OF COIL SPRING IN VEHICLES USING FINITE ELEMENTS METHOD
- ANALYSIS OF WEAR AND SEM CHARACTERISTICS ON FERROUS COMPOSITES THROUGH POWDER METALLURGY METHOD
- NUMERICAL AND EXPERIMENTAL THERMAL ANALYSIS OF AL6061 ALLOY FRICTION STIR WELDING
- ROOF TILES PREPARED BY USING FLY ASH AND ANALYZING MECHANICAL PROPERTIES
- METALLURGICAL INVESTIGATIONS ON BIMETALLIC WELD JOINTS IN AUSTENITIC/FERRITIC STAINLESS STEELS FOR PAPER-PULP INDUSTRIES
Last modified: 2018-10-17 19:22:51