A STUDY ON OIL FIELD SANDSTONE THROUGH POROSITY AND PERMEABILITY PARAMETERS
Journal: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) (Vol.8, No. 5)Publication Date: 2018-10-31
Authors : A. SIVASAKTHI;
Page : 61-66
Keywords : Carbonate; Permeability; Porosity; Recovery; Sandstone & Water Flooding;
Abstract
Crude oil reservoirs have different formation types according to their environmental and geological conditions. Sandstone is one of the most common formations of crude oil reservoir, which has high oil bearing capacity than carbonate formation. In this research article, oil field sandstone was collected and analysed through porosity and permeability. The sandstone was visually observed for the classification of sandstone. The porosity of the sandstone was determined by porosimeter equipment and found to be 10.93 %. The permeability of sandstone was measured in the gas permeameter and found to be 0.084 mD. The core flooding operation gives an idea about the recovery efficiency of particular core and crude oil. The oil recovery efficiency of water flooding and chemical flooding was found to be 35 % and 42.23 %. The recovery of crude oil was slightly less in the water flooding mechanism due to the low porosity and permeability of sandstone. The determination of rock characterization in the initial stage helps in finding the better recovery technique, suitable for the oil production.
Other Latest Articles
- MAGNANIMITY OF THERMAL POWER PRODUCTION ENGINEERING TECHNOLOGICAL BREAKTHROUGHS: AN EMPIRICAL ANALYSIS OF ADAPTATION TO CLIMATE CHANGE IN INDIA
- THE POWER FACTOR CORRECTION IMPROVEMENT FOR A SINGLE PHASE AC/DC CONVERTER USING AN ENABLING WINDOW CONTROL
- EXPERIMENTAL INVESTIGATION AND ANALYSIS OF SMAW PROCESSED CARBON STEEL PIPES
- NOX EMISSION REDUCTION OF CI ENGINE USING OPTIMIZED DUAL BLEND BIODIESEL
- RECYCLABLE PACKAGING – A STEP FORWARD FOR THE ENVIRONMENTAL SUSTAINABILITY WITH THE COST BENEFIT TO THE ORGANIZATION A CASE STUDY WITH REFERENCE TO AN INDIAN AUTOMOBILE INDUSTRY
Last modified: 2019-01-07 16:12:51