Experimental Investigation & Analysis of Process Parameter in Machining Of Aluminum Based Metal Matrix Compoite
Journal: International Journal of Engineering Sciences & Research Technology (IJESRT) (Vol.3, No. 1)Publication Date: 2014-01-30
Authors : Prakash Kumar Dalai; Ajit Senapati;
Page : 94-102
Keywords : Mach inability; Cutting parameter; Cutting fore; Surface roughness; Chip thickness.;
Abstract
Mach inability of aluminium alloy (A-356) reinforced with coconut shell ash 10%wt) and fly ash(10%wt) particles fabricated with stir casting process was investigated. The mach inability and mechanical properties of the metal matrix composites was studied by performing machining in lathe, hardness test and tensile test. In this paper mach inability is evaluated by studying various data parameter of aluminium alloy (A-356) and A-356+ 10% Fly ash and A-356+ 10% coconut shell ash such as cutting force, surface roughness, chip thickness during turning at different cutting speed and constant depth of cut and feed rate. In this paper also study mechanical properties means hardness and tensile strength of the aluminium alloy (A-356) and A-356+ 10% Fly ash and A-356+ 10% coconut shell ash were subjected to testing the hardness test and tensile test.
Other Latest Articles
- Microcontroller Based Advanced Triggering Circuit for Converters/Inverters
- A Review on Advanced Engines Technology
- Vehicle Number Plate Identification System (VNPIS)
- Morphology Based Approach for Detection and Extraction of Blinking Region Scene from GIF Images
- Proposed Technique to Improve VANET’s Vehicle Localization Accuracy in Multipath Environment
Last modified: 2014-09-15 22:33:49