Common-Gate with Common-Source Active Balun Circuit Small-Signal Analysis in CMOS Technology
Journal: International Journal of Scientific Engineering and Science (Vol.3, No. 8)Publication Date: 2019-15-09
Authors : Frederick Ray I. Gomez Maria Theresa G. De Leon John Richard E. Hizon;
Page : 19-22
Keywords : Active balun; small-signal analysis; common-gate with common source; CMOS;
Abstract
This active balun is comprised of 2 amplifiers namely common-gate (CG) amplifier (M1) in the 1st stage and common-source (CS) amplifier (M2) in the 2nd stage as shown in the Fig. 1. The input signal is fed into the drain of M1 and into the gate of M2, while the outputs are probed at the drains of M1 and M2. Load resistors R1 and R2 dictate the output voltages as well as the voltage gains of the two output signals with respect to the input signal
Other Latest Articles
- Effect of Sand Mixing on Clay Structural Parameters
- Clip-Attach EMI Shielding on Electronic IC Package
- Differential Active Balun Circuit DC Analysis
- KINEMATIC ANALYSIS OF TRAPEZOIDAL SUSPENSION
- Research on the Design and Construction of Financial Investment Innovation Mechanism for Ecological Environment Construction under Collaborative Management
Last modified: 2020-03-17 21:58:18