Prototype of Telemetry Vibration and Tilt Devices Based IoT (Internet of Think) As an Early Warning of Landslides

The design of the tool with the many components will be swelling in expenditure and the length of time in the process, another problem is the reading of monitoring can only be seen through the software application from a computer / laptop. So that it cannot be monitored over long distances. Furthermore, prototype design of telemetry equipment can be detected that can detect vibration and slope of land in landslide-prone areas, as well as the ability to measure and transmit data as IoT-based telemetry (Internet of Think) from the sensor position at the test point to web hosting.The sw420 sensor and the mpu6050 sensor will give a command in the form of a voltage of 3.3vdc to 5vdc to the esp8266 nodemcu module. The next voltage sensor is processed into the Arduino Idea program. The input is analog voltage, the program will be coded v = 1000 which will produce an adc data display (analog to digital converter).Information on data that has been uploaded to the esp8266 module nodemc, then the angle x, angle y, angle z, and vibration data are sent over the internet (WiFi), the vibration and slope telemetry results have been presented on the website (http: // monitoring-longsor.000webhostapp.com/index.php). Based on the telemetry testing that has been done, that the sirens and early warning lights will be active if there is a slope at <300