FOR MINIMUM ENERGY USE IN A AIR CONDITIONING ROOM INSTALLATION AND OPERATION OF THE OPTIMUM CONTROL SYSTEMS

For a specific operating system and clothing conditions it is very important to provide comfort conditions and minimize energy needs. To achieve this optimum control system equipment is required in air conditioning systems. In these systems as variables air temperature, humidity, velocity and mixing ratio should be checked. Regions that need to be controlled for air conditioning with minimum energy use residences, workplaces, greenhouses, submarine, aircraft etc. there may be places. An experiment intallation was set up to show that the desired conditions can be met with different energy expenditures in air conditioning systems. In the case of the least energy expenditure necessary control equipment was placed on the room to operate the system. At different values of the variables this system was run and tested. As a result of the experimental studies it was observed that the amount of air mixed by circulating back and again depending on the variables in the room did not cause any negativity Fresh air intake and exhaust air outlet rates are compatible between them. The control system was found to work well within the permitted limits. As a result control variables and control elements are compatible. The studies carried out here show that it is possible to control digitally in a climate room using a computer.