Minimization of Plastic Injection Molding Defects Using Hot Feeding System
Journal: International Journal of Science and Research (IJSR) (Vol.4, No. 8)Publication Date: 2015-08-05
Authors : Dhananjay Singh; Pradeshi Ram;
Page : 835-838
Keywords : Autodesk mold flow advisor; taguchi method; hot flow; cold flow; Analysis of variance ANOVA;
Abstract
This objective of this thesis was to development and analysis a development and analysis of Minimization the defect of product made by the injection molding by both cold and hot feeding system. A literature review concern available experimental techniques for injection molding products was presented. But we used Autodesk simulation moldflow 2014 MFA is complete suites for definitive, validating, optimizing, analyzing plastic parts, and mold design in plastic injection molding. In this we used some of the steps for calculation of the work. Firstly import a CAD model and then mesh the cad model with software then material we used to form the product is GENRIC PP (polypropylene) then choose the simulation type selection (cooling quality) and then we set the process parameter like mold temperature, melt temperature, injection pressure, cooling time, runner system, (hot and cold) and after that we get the results of our product by using DOE (design of experiment) technique by Taguchi Method. We have made some of the result tables based on the software analysis
Other Latest Articles
- Sum to Modified Booth Recoding Techniques for Efficient Design of the Fused Add-Multiply Operator
- Experimental Analysis of Heat Pipe for a Computer Processing Unit
- Searching Queries Using Feedback Sessions
- State-Space Formulation for a CNG Converted Diesel Engine Variables?
- Review on PAPR Reduction in OFDM Based System
Last modified: 2021-06-30 21:52:09