Tribological Properties of Polyvinyl Alcohol/Uncaria Gambir Extract Composite as Potential Green Protective Film
Journal: Tribology in Industry (Vol.45, No. 2)Publication Date: 2023-06-15
Authors : Dieter Rahmadiawan Hairul Abral Shih-Chen Shi Tzu-Teng Huang Rahadian Zainul Ambiyar Hendri Nurdin;
Page : 367-374
Keywords : Uncaria Gambir; PVA; Protective Film; Friction; Wear;
- Influence of Technology Parameters on the Total Cutting Force in the Hard Turning Process with NF MQL and NF MQCL Method Using Nanofluids
- Study on Cutting Parameters to Reduce the Surface Roughness in Hard Turning of SKD 61 Steel using Taguchi Method
- Multi-Objective Optimization of Cutting Parameters in Hard Turning Process Using Genetic Algorithm (GA) & Artificial Neural Network(ANN)
- ARTIFICIAL NEURAL NETWORK AND PARTICLE SWARM OPTIMIZATION HYBRID INTELLIGENCE FOR PREDICTING CUTTING FORCE DURING HARD TURNING OF H13 TOOL STEEL WITH MINIMAL CUTTING FLUID APPLICATION
- Optimum Parameters for Cutting Hard and Tough Material (Hardox Steel) by Abrasive Water Jet Cutting Process
Abstract
Polyvinyl Alcohol/Uncaria Gambir Extract (PVA/UG) composite provides good UV light protection and antibacterial, tensile, and thermal properties. To continue our previous research, the tribological properties of PVA, PVA/BA, PVA/UG, and PVA/UG with heat treatment (PVA/UGt) were conducted. The ball-on-disk test results show COF reduced by 42% in PVA/UG compared to PVA. It was proved that heating the PVA/UG significantly improves the tribological properties of the PVA composite, resulting lowest COF (0.08) and wear area (390 µm2). Additionally, incorporating UG also increases the hardness of the PVA composite by up to 73% and. These results corroborate the application of this composite as a potential green protective film.
Other Latest Articles
- Effect of Graphite Filling Pore Structure Size on the Tribology Behaviors of Tin Bronze/45 Steel Pairs With Grease Under Low-Speed and Heavy Load Conditions
- THE SPACE ERAERA FROM THE VIEWPOINT OF PIONEER ARCHITECTS
- Elastic-Plastic Properties of hard Cr-Based Nitride Coatings Deposited at Temperatures Below 200°C
- HABITABLE CONDITIONS REQUIRED FOR SPACE SETTLEMENT
- A CRITICAL REVIEW OF DYE EFFLUENT
Last modified: 2023-10-02 18:04:13