Preparation and Study of the Physical Properties of Lightweight Cement Reinforced with Fillers

This research included the effect of fillings on the mechanical properties of lightweight white Portland cement, as different percentages of the fillers used in the production of this type of lightweight cement were used. Several engineering and physical tests were conducted on lightweight white Portland cement models in this research, where it was found to produce lightweight cement with a compressive strength ranging between (1.16 - 6.5) N/mm2, and the density was measured and the recorded values ranged between (0.5- 1.04) g/cm3, and the weight of the models was recorded and the recorded values ranged between (65-130) gm. The research aims to produce lightweight white Portland cement with good physical and mechanical properties that can be used in the manufacture of building units, with a focus on the economic aspect of producing this type of lightweight cement from available materials and at the lowest possible cost