Adsorpsi amonia dari limbah cair industri penyamakan kulit menggunakan abu terbang bagas
Journal: Majalah kulit, karet, dan plastik (Vol.29, No. 2)Publication Date: 2013-12-30
Authors : Rihastiwi Setiya Murti; Christiana Maria Herry Purwanti; Suyatini Suyatini;
Page : 85-90
Keywords : Ammonia; adsorption; bagasse fly ash; tannery wastewater;
Abstract
The aim of this study is to reduce ammonia concentration in tannery wastewater using bagasse fly ash in a batch adsorption system. Experiments were conducted to study the effect of various parameters such as adsorbent dose and contact time. Data analysis was performed by calculating the efficiency of adsorption and fitting the data into Freundlich and Langmuir isotherm models. Correlation coefficient and mean squared error were used to evaluate the performance of the models. From the results, it was found that the operating conditions to achieve an optimum removal efficiency of 45.72% are 1 hour contact time and 2 grams of bagasse fly ash. The results also indicate that the data fits Langmuir model well where Langmuir constant Qo, b, and correlation coefficient were found to be 0.706 mg/g, 0.209 L/mg, and 0.9424, respectively.
Other Latest Articles
- Pembuatan vermikompos menggunakan limbah fleshing di industri penyamakan kulit
- Penggunaan tanaman air (bambu air dan melati air) pada pengolahan air limbah penyamakan kulit untuk menurunkan beban pencemar dengan sistem wetland dan adsorpsi
- Pengaruh sulfur terhadap sifat fisika campuran pale crepe dan SBR untuk karet tahan panas
- Prototipe sistem peringatan dini berbasis SMS untuk mendeteksi kenaikan kadar gas amoniak di pengolahan air limbah industri penyamakan kulit
- Efek ukuran, bentuk dan konsentrasi partikel precipitated calcium carbonate (PCC) yang ditambahkan pada sifat mekanik komposit karet alam
Last modified: 2016-02-09 12:17:38