Study of quality parameters of the surface layer in the processing of static-pulse method
Journal: Engineering industry and life safety (Vol.9, No. 1)Publication Date: 2012-03-31
Authors : Kokoreva O.G.;
Page : 64-67
Keywords : static-pulsed treatment; the depth of the hardened layer; the hardness; the surface of the sample; the degree of deformation;
Abstract
The results of laboratory tests of samples of surface hardness, hardened by the static-pulsed treatment (SIO), depending on the different modes of treatment. The analysis of the results in comparison with other methods of hardening. The obtained experimental data indicate that the hardened surface reaches a depth of 7-8 mm on the sample.
Other Latest Articles
- Optimization of сutting processes on the basis of the energy patterns of materials deformation and fracture
- Estimation compatibility tribosystems containing bearing alloys
- The study of regularities of formation form errors, surface roughness and waviness in the mortise centerless grinding pins frogs drive shafts, depending on the momentary cross feed
- The study of regularities of formation form errors, surface roughness and waviness in the mortise centerless grinding pins frogs drive shafts, depending on the speed of the leading circles
- Investigation of welded joint defects by method of form-coefficient
Last modified: 2013-08-29 01:54:51