ALGORITHM OF DETERMINATION OF POWER AND ENERGY INDEXES OF SCREW INTENSIFIER ON THE BULLDOZER WORKING EQUIPMENT AT TRENCH REFILLINGS

A bulldozer work at trench refilings is conducted by cyclic, machine shuttle motions that increases a right-of-way; increasing of time charges, fuel and labour by the side of the continuous refilling method. Besides the indicated defects gets worse also the quality of the trench refilling: the uneven soil output into a trench with large portions results the damages of pipes isolation and emptinesses formation, in consequence ? settling and washing of soil. A bulldozer with the screw intensifier (SI), is deprived lacks of an odinary bulldozer ? moving along a trench, it moves the loose soil that does not fall on a pipeline, but rolles on it. Thus the circuitous speed of a cutting edge of SI exceeds the speed of the base machine moving that provides the strong soil treatment (before dispersion) before output into a trench. Purpose. The algorithm development of the rotational moment determination on the SI driveshaft, the consumable energy, the energy intensity and the working process productivity of the reverse trench refillings depending on physical and mechanical properties of soil, geometrical parameters of SI and bulldozer optimal speed. Conclusion. The developed algorithm allows to define that at the fixed value of the rotational speed the rotational moment and indicated efficiency of SI at the optimum speed increasing of the base machine change on a linear law; the optimum speed change of the base machine practically does not influence on the energy intensity at the considered change of the rotational speed .