BUS MONTIORING AND CONTROLLING SYSTEM USING GSM MODULE

The security in traveling is primary concern for everyone. In this project we have to discuss about the Bus Monitoring and Controlling System using GSM module. The road accident will be increased due to the bad construction of road and the careless driving. Why these problems are occurred? Because sometimes drivers are not used seat belt, driver removes his hand from the staring during driving, not maintain safe distance from the other vehicle. To remove such problems we have used number of sensors. Seat belt sensor and Touch sensor are fitted with the staring. And Sharp IR sensor is used to maintain the safe distance between two vehicles. Another problem are also occurred during the travelling. The temperature of bus engine will be increased in great extent and driver could not worry about the fuel level. To overcome this problems we can used sensors like temperature sensor and fuel level detector. What is the need of these sensors in today’s vehicle? Without this sensor vehicles are able to run from one place to other. Then why the need of use of sensors arises? The answer is to reduce the number of accidents that happen due to human error or technical error in the vehicle. The threshold of all sensors is set to their respective range. If it gets cross the set range then buzzer will be activated and the message is displayed on the LCD screen in the bus. And message will send to the number which is saved in the GSM module.