PRODUCTION OF LIQUID FUELS FROM WASTE HDPE PLASTICS AND OPTIMIZING PARAMETERS

In my research of fuel production through waste HDPE and plastic with the help of plastic to catalyst ratio as a catalyst in that first of all i prepare a mild steel closed air tight vessel having a lid on the top of it along with the hole which is attached by a long galvanize steel pipe then I filled the container up ? of its height with the waste plastic and polythene then by using external source of heater temperature of closed chamber is arises up to 300o C-450o C from room temperature on which the pyrolysis takes place which converts the waste plastic or polythene in useful fuel whose texture ,odour, colour, and all other properties like flash point ,fire point, cloud point, pour point, viscosity, are almost near to the petrol. After that the outcome fuel from a waste plastic or polythene is used as a normal fuel in a 100 CC bike and found the fuel gives more millage as compare to petrol about 4-6 km. Which increases the efficiency of the engine by 5-8%.& by using Taguchi Technique I optimize the various parameters which affects the production of plastic fuel by using advance technique I found the plastic to catalyst ratio is most affecting parameter.