Optimization of the Process Parameter in Drilling of GFRP using HSS Drill
Journal: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) (Vol.7, No. 6)Publication Date: 2018-12-31
Authors : K. Karthik A.Manimaran J.Veerendra Rayudu; Diva Sharma;
Page : 403-408
Keywords : Drill Holes; Design; Machine; Experiment and Parameters;
Abstract
Fabrication and assembly of parts requires drill holes. The importance of better productivity of the Air craft parts while assembling of polymer composite to avoid the rejection process in drilling operation. The drilling operation of machining process is very important in production of aircraft components due to drilling operation 60% of rejection due to delamination. To minimize the rejection of components the selection of process parameters are required. Designs of experiments were conducted using milling machine and modelling analysis used by regression model and Taguchi technique. From the experimental results, feed rate is the most important parameter for delamination.
Other Latest Articles
- An Examination of the Essential Aspects in Execution of Enterprise Resource Planning in Manufacturing and Production Industries
- Review on the Characteristical behavior of Advanced 3D Spacer Composites
- A Comparative Study Between the Successive Screw Displacement and Quaternion Based Methods Used in Forward Kinematics of Serial Robot Manipulator
- An Efficient Hybrid Analytical Approach To Film-Pore Diffusion Model Using Wavelets
- Experimental Investigation of High Speed Drilling of Glass Fiber Reinforced Plastic (GFRP) Composite Laminates Made up of Different Polymer Matrices
Last modified: 2018-01-13 20:03:49