THE STAPLING OF MATERIAL LAYERS PROCESS CAPABILITY STUDY BY THE PRODUCTION OF THE PRODUCT "MULTIAXIAL"
Journal: PRODUCTION ENGINEERING ARCHIVES (Vol.2015, No. 6)Publication Date: 2015-03-31
Authors : Katarína Lestyánszka Škůrková;
Page : 10-13
Keywords : process; stability; normality; capability; stapling;
Abstract
Ensuring the process capability currently means the warranty, that produced products will be in accordance with requirements -
from the company or customer´s side. This study focuses on the statistics control of stapling of material layers process capability by production of the product "multiaxial". The stapling of material layers process is evaluated by control charts, specifically by control charts for average and range( X , R). As the results show, on the basis of the diagram for average and range we we are able to say that the process is under the statistical control. We had also finished the reguest for capability of process, where the indexes of capability process Cp and Cpk are higher than the determinated value by 1,33 points. The obtained values are: Cp = 1,68 a Cpk = 1,55
Other Latest Articles
- Hemşehri Derneklerinin Kente Uyum Sürecine Etkisi Üzerine Bir Değerlendirme
- Hemşehri Derneklerinin Kente Uyum Sürecine Etkisi Üzerine Bir Değerlendirme
- MANAGEMENT OF THE BASIC CHARACTERISTIC OF A SUPERVISOR AND MANAGERIAL POSITION
- İzmir ve Serbest Cumhuriyet Fırkası [12 Ağustos-17 Kasım 1930]
- Karahanlı Hânedân Üyelerinin Gazneliler ve Selçuklularla Sıhriyeti
Last modified: 2018-03-27 21:10:25