Development and Characterization of Aluminum 2214 Alloy with using Reinforcement of Silicon Carbide
Journal: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) (Vol.10, No. 2)Publication Date: 2020-05-30
Authors : Manjunath K; Thirtha Prasad H P;
Page : 453-468
Keywords : Aluminum Alloy (Al2214); Silicon Carbide (SiC); UTS; YS & Compression Strength;
Abstract
The proposed project work is to fabricate and compare the mechanical properties, of Al2214/SiC composites. The composites were processed by using stir casting method and amount of SiC, is assorted from 2-10 wt% in level of 2 wt%. The prepared composites of Al2214/SiC are to determine the mechanical character such as Microstructure, UTS, YS, Compression Strength, as per the ASTM standards. The obtained consequence shows that casting was equally distributed without any cracks, voids and discontinues or any faults in the casting. The UTS, YS of the composite was enhanced with the enhance in wt% of SiC and higher compared to ascast aluminium alloy. The compression strength of the developed composites increases marginally with the enhance in wt% of SiC and also the hardness of the composites increases with the enhance in percentage of SiC.
Other Latest Articles
- Comparative Study of the Effect of Imidazole and Triethylentetramine on the Corrosion Behavior of API-5L-X65 Steel in 1M HCl Environment
- Numerical Analysis of Hail Ice Material Model Under Variable Velocity Impact
- Micro-Structural Evolution Analysis and Assessment of Tribological Behaviour 425 of Nickel Alloy Reinforced with Sio2 and Al2o3 Hybrid Metal Matrix Composites
- Microstructure and Dry Sliding Wear Behaviour of Lm6 Alloy Solidified 413 Under the Influence of Low Frequency Mold Vibration
- Synthesis of Ceramic Composite Material by Powder Metallurgy and Optimize Process Parameters in Regression Method in Machining Micro Abrasive Air Jet Erosion Tester
Last modified: 2020-05-30 23:42:07